Trinnov Audio Altitude16, Руководство пользователя

Страница: 42 / 156

Altitude
16
42
5 _BASIC SETTINGS
5.1 _NAMING YOUR SOURCES
The Altitude
16
provides very flexible Source Configurations . Each Source Configuration
can be renamed to reflect the actual source to which it corresponds. By default, the source
names correspond to the names of the back panel connectors but can be edited in the
Home/Sources Config page of the Advanced Settings Interface.
A Source Configuration can also include specific output and processing parameters. Therefore, it can be used to switch
between outputs or between different processing settings. For example, it is possible to configure two Source Configurations
set on the same input connectors but set with different names to recall different settings.
The Home/Source Config page consists of one vertical tab per source on the left and source-specific parameters on the
right.
Use this button to go back
to the Main screen
Click on the Save button
to save new settings
Click on the Reload button to restore
the previously saved settings
Figure 33: Source Configurations panel
IMPORTANT NOTE: It is particularly important to define user friendly names for the first four sources because they
are displayed on the front panel screen or from the IR remote control source selection buttons.
List of the sources in the advanced
settings interface
Source and format information
displayed on the front panel
IMPORTANT NOTE: Changes are not applied until saved via the Save button in the bottom right corner of the screen.