Trinnov Audio Altitude16, Руководство пользователя

Страница: 73 / 156

User manual
73
6.4.4 _INDIVIDUAL SETUP MENU
6.4.4.1 _REGULAR BASS MANAGEMENT
The settings provided are similar to the Quick Setup menu but are adjustable on each speaker individually. Each speaker
has the following parameters:
• The activation of each sub by checking the Active box (which recalculates the attenuation accordingly): The bass-managed
signal will be redirected to the selected subwoofer(s);
• Gain and Polarity : These additional settings provide the option to invert the polarity and adjust the gain of the signal re-
directed to the subwoofer(s). These settings are only applied to the signal redirected to the subwoofer(s), the signal going
to the speaker remains unchanged;
• Low Pass – Sub(s) : These settings will delimit the cutoff frequency below which the signal from the channel will be redi-
rected and played by the subwoofer(s). You can select the type of filter (Linkwitz-Riley, Bessel or Butterworth), the cutoff
frequency and the slope used by this filter. These settings are only applied to the signal redirected to the subwoofer(s);
• High Pass – Satellites : This section will delimit the low-end cutoff frequency of the signal sent to the satellites. You can
here select the type of filter (Linkwitz-Riley, Bessel or Butterworth), the cutoff frequency and the slope used by this filter.
These settings are only applied to the signal redirected to the Satellites.
NOTE: Bass Management mode must be set to On in order for these settings to be taken into account.
Be aware that it will depend on the speaker’s specs to reproduce the integrity of the content.
Figure 62: Configuring the bass management settings for every speaker
IMPORTANT NOTE: If there is no active sub for one or more satellite, the high-pass frequency is still active. If a full-
range speaker is required, set the High-Pass filter type to None and it will disable the filter.