Trinnov Audio Altitude16, Руководство пользователя

Страница: 58 / 156

Altitude
16
58
IMPORTANT NOTE: The last speakers on the list are up-firing Dolby-Enabled speakers. Dolby-
Enabled speakers have an included filter designed to enhance the immersion effect.
NOTE: Dolby-Enabled up-firing speakers uses elevation speaker channels. In cases in which both
Dolby-Enabled and celling speakers are used, some conflicts can occur. It will appear on the side
panel.
6.3.7 _REMOVING SPEAKERS
To remove one or more speakers (including subwoofers):
• Click on the speaker you want to remove. Either in the 3D representation or in the list: it will be displayed in yellow.
• Click on the
Remove speaker button.
6.3.8 _CONFIGURE THE SETTINGS OF EACH SPEAKER
Once the complete set of speakers in your system is defined, you can configure the
settings of each speaker.
The speaker configuration table located in the lower part of the Speaker/Room setup tool allows you to:
• Manually map the channels of the Dolby, Dolby Atmos, DTS:X, DTS or Auro-3D formats to each speaker (optional);
• Configure the arrays of speakers for Dolby and DTS legacy format (See Speakers Arrays chapter below);
• Configure the active crossover settings (optional);
• Specify the physical output for each speaker/driver;
• Send pink noise to the assigned physical output in order to verify that the routing of each channel to each loudspeaker/driver is correct.
The Small View button reduces the 3D view and enlarges the speaker configuration table. Every speaker can be further
configured as shown below:
Figure 50: The speaker configuration table