Trinnov Audio Altitude16, Руководство пользователя

Страница: 62 / 156

Altitude
16
62
To open the PEQ editor, click on the PEQ icon of the speaker or driver you want to edit. The PEQ editor will be
displayed as a pop-up which overlay the 3D view, as followed:
6.3.12.1 _ADD A PEQ
To add a PEQ, click on the Add button. A new line will appear in the table. This line is a Parametric Equalizer band. You
can add as many bands as required per channel.
The overall procedure to configure a PEQ is as shown below:
• Open the PEQ editor of the speaker (or driver) you want to edit;
• Add as many bands as needed using the Add;
• Set the parameters of each band as wanted or as needed by the speaker manufacturer. The parameters are explained
below;
• Eventually control the result with the pink noise using the button ;
• If needed, save the settings as an EQ group, this makes easier to duplicate a setting on several speakers (procedure
explained later in this chapter);
• Close the PEQ editor with the Ok button at the bottom of the page.