Trinnov Audio Altitude16, Руководство пользователя

Страница: 143 / 156

User manual
143
Figure 138: Recombined amplitude response of the speaker
NOTE:
• The levels, delays and polarities set previously are ignored during the calibration. In other words, adjusting these
parameters before launching the calibration will have no effect on the result.
• Under some circumstances, the automatic crossover algorithm may suggest inverted polarities for a driver from
one speaker to another. This can be explained by various factors:
- The physical polarity of one speaker is, indeed, inverted (from a cabling issue, as an example). In this case, the
correction suggested by the Optimizer should be applied to improve audio quality.
- Two adjacent drivers (for instance Mid and High) are phase-shifted by an amount of about 90°. In this case, the
Optimizer provides more uncertain results as it gets harder to see whether the drivers are in or out of phase. If you
are not comfortable with the results provided by the Optimizer, you can correct them manually afterwards (via the
button “Invert polarity”).
10.4.5.2 _LISTEN TO EACH SPEAKER CONNECTED TO THE CROSSOVER
Listen carefully to each speaker connected to the crossover. You can play pink noise from the Altitude
16
and/or play your
favorite music/cinema samples.
10.4.6 _SAVE THE PRESET
Last but not least, don’t forget to save the preset to avoid losing the crossover settings.