Trinnov Audio Altitude16, Руководство пользователя

Страница: 153 / 156

User manual
153
13.6.1 _MICROPHONE SPECIFICATIONS
• 4 capsules in tetrahedron configuration.
• Individual compensation filters
• Frequency response /- 0.1dB across the 20Hz-24kHz frequency range
• Spatial resolution below +/-2°
• Built-in preamp
• A 9V PP3 LR61 battery powers capsules and electronics
• Camera / Microphone thread.
THREAD
MICROPHONE
CABLE
13.6.2 _POWER SUPPLY
The power supply located in the base of the microphone uses a standard 9V PP3 LR61 battery. The red led indicates the
battery Level. Replacing the battery requires removing the 3 screws at the bottom of the microphone.
13.6.3 _INDIVIDUAL COMPENSATION FILE
The individual compensation file of the microphone used by the Altitude
16
can be modified
in the Optimizer Settings/Calibration page.
Figure 145: Calibration page
Always make sure the microphone serial number indicated in the calibration page matches the label at the bottom of your
microphone. If not, use the Configure button of the required Measurement to select the correct compensation file.
For future measurements, use the Default Microphone button to make the required compensation file automatically
selected in the preset.
The 3D localization of the speakers can only be performed if the connection order of the capsules is respected.
13.6.4 _CONNECTION ORDER
The 3D localization of the speakers can only be performed if the connection order of the
capsules is respected.