Trane CVRC-M-1D, Руководство пользователя

Страница: 90 / 126

Unit Identification
For remote human interfaces with the multiple unit option board installed,
the following display will be inserted as the second display in display in
each setting group, immediately following the report heading:
When the unit number is changed, the human interface will clear the
buffers of any data from the previous unit, and update the buffers with
new data before any of the unit data is displayed. The display will say the
following until the new unit data is received or for 5 seconds, which ever
comes first.
If the new unit data is not received after 5 seconds, the following display
is used. For remote human interfaces with the multiple unit option board
installed, this display should always be used in place of the “No
Communication to Unit, Data Not Valid” display.
When Enter is pressed, the display returns to the “Modify Settings for
Unit X” display.
For remote human interfaces with the multiple unit option board installed,
the following displays will be inserted as the second display in the various
reports, immediately following the report heading:
The custom report can be different for each unit, since the report
sequence for each unit is stored at the unit.
90 CVRC-M-1D
Remote Human Interface
Modify Settings for Unit:
Press (+) (-) to Change Setting
Where x is equal to 1, 2, 3 or 4.
Updating Unit Data, Please Wait
Custom Report for Unit X
Please (Enter) to Select New Unit
Chiller Report for Unit X
Please (Enter) to Select New Unit
Refrigerant Report for Unit X
Please (Enter) to Select New Unit
Compressor Report for Unit X
Please (Enter) to Select New Unit