3.2 TECHNICAL SPECIFICATION
-6-
1
2
5
3
8
6
10
7
4
9
Motor voltege
415V/50Hz
Main motor power
7.5HP
Scoring motor power
1HP
Main blade diameter
400mm
Scoring blade diameter
120mm
Main saw blade axis diameter
30mm
Scoring blade axis diameter
20mm
Main blade speed
3000/4000/5000rpm
Scoring blade speed
8000rpm
Blade tilt degree
45°
～
90°
Sliding table cutting stroke
3800mm
Max cutting thickness
125mm
Max cutting width
1500mm
For avoiding electric shock or fire, maintenance of electric system should be carried out by
professional staffs and using authorized original accessories.
3.3 ELECTRICAL CONNECTION
- Electrical installation should be carried out by competent, qualified personel.
- The mains connection should be made using the terminal box.
- Replacement of the power supply cable should only be done by a qualified electrician
- Connect main leads to a standard 400V ±10% electrical supply which has protection devices of under-voltage, over-
voltage, over-current as well as a residual current device(RCD) which maximum residual current rated at 0.03A.
3. SPECIFICATIONS
3.1 MAIN COMPONENTS
1 - Sliding carriage assembly
2 - Cross cutting fence assembly
3 - Sliding table assembly
4 - Rear extension table
5 - Saw blade guard assembly
6 - CNC Computer
7 - Right extension table
8 - Rip fence assembly
9 - Main working table
10 - Frame Assembly
WARNING
