6.4.3.2 Cutting material automatically
- Click button or panel (6.1) “NEXT” button E, the system will control fence to next order automatically
-Operator push material for cutting according to cutting note graphic, cutting proposal preview graphic shown in auto
operation list.
6.4.3.1 Manual uploading arrangement optimization file
- Click button, chose arrangement model to save
optimum proposal, cutting length and order will show on
widow after complete.
6.4.3 Auto cutting model
On main operation panel (6.2), click button into
auto operation panel (6.4.3)
6.4.3
-30-
Prohibit put down fence
Prohibit use main blade with diameter over ø400
Prohibit blade tilting angle over 0º
6.4.4
6.4.4 Cutting wood with sliding table
- Put the wood board on sliding table, fix the wood board
with block B and wood presser C
- Operator stand in the A position, push the handle
on sliding table, cutting wood board, complete cutting
operation.
A
B
C
6.4.5 Cutting wood with fence bracket
- Lock sliding table. Adjust the position of fence bracket,
get close to side of wood board, push wood board to
blade direction.
- Consider your safety, we suggest you push the wood
board through plastic handle.
- When you cutting small size wood board, please use
small push hand to avoid cutting your finger.
6.4.5
If need joint furniture design software, please contact local agency or manufacture
WARNING
CAUTION
