6.2.1.3
- Distance between blade to slide table
- Manual set distance between blade zero to
slide table
- Distance between blade to zero( Default to
zero, inalterable)
- Blade moving to corresponding position
- Blade stop moving
- Set practice distance between blade to slide
table
- Blade searching zero automatically
●
Saw blade lifting operation panel (6.2.1.5)
- Input negative value, fence moving close to blade
- Input positive value ,fence moving close to zero
position
- Different from practice, change to
practice, reset ;Fence deviation distance<1250mm,
reset
- i
s used in debugging machine for
manufacturer
When shows different location to the practice, set input
value as the practice value.
6.2.1.4
6.2.1.5
6.2.1.6
C
A
B
Fence deviation zero location 6.2.1.3
A-Zero switch
B-Positive limitation switch
C-Negative limitation switch
Right status for fence zero and absolute location like
6.2.1.4
A
- is different from practice, adjust zero switch
position, reset
- is used in debugging machine for
manufacturer
When shows different location to the practice,
set input value as the practice value.
A-Lifting zero switch(6.2.1.6)
The default specification of blade is
Φ400. If change to
other models of blade, set the lifting height manually
CAUTION
WARNING
CAUTION
