-21-
5.5.4 Function at the Operator Level
5.5.4.1 Working with the device
- Keys 1x press at the same time
-With this shortcut, the actual value (display value) on the
adjustable reference value is set (in absolute -mode onlypossible
when the offset is not enabled).
-The reference value can be entered with the parameter P09.
(5.5.4.1)
5.5.4.2 Switching incremental or absolute
-1x pressed
-With this key the indicator is switched from absolute mode to
incremental mode:
-The display value is temporarily set to ZERO, the symbol „INC“
appears in the display.
-Actuating the key again the absolute is activated and the symbol
“ABS” is displayed.(5.5.4.2)
5.5.4.3 Activation Offset Measurements
-1x pressed
-This key enables/disables each of the three adjustable offset
dimensions (only possible in the absolute mode). Ineach case an
offset is added to the display value.
-The activation of an offset level is indicated by the symbols1
,2or3 .
-The offset measurements can be entered in the parameter P10,
P11 and P12.
-Additionally, parameters can be determined with P13, whether
and how many offset measurements can beselected.(5.5.4.3)
5.5.4.4 Fraction Display in the Inch-Mode
-1x pressed
-With this key the display can be changed in the Inch-mode
(parameter P02 = 1) as follows:
1x key pressed: Display Inch- fraction display 1/64 Inch 1x key
pressed: Display Inch- fraction display 1/32 Inch 1x key pressed:
Display Inch- fraction display 1/16 Inch 1x key pressed: Inch-
Decimal Display 0.001 Inchetc.(5.5.4.4)
5.5.4.1
5.5.4.2
5.5.4.3
5.5.4.4
