-16-
A
B
A
B
Tools required
：
- 5mm socket head wrench
- 16mm fork wrench
- Put the straight edge B on the main table and extension
table to check the flatness.
- Loosen the bolts A to micro-adjust the flatness.
5.2
5. ADJUSTMENT
Handle the tools with protective gloves.
5.1.2
2mm
F
5.1 SCORER ADJUSTMENT
A
B
E
Forbid to adjust nut E after location(5.1.3).
5.1.1
D
C
5.1.3
Using scoring blade when cutting composite board. The
top height of scoring blade should be 2 mm higher than
the operating board. ( 5.1.1)
Tools required
：
- 5mm socket head wrench
Please adjust the scoring blade as following(5.1.2)
：
- Loosen the handwheel A, adjust the scoring blade to the
right height with knob B, then tighten handwheel A.
- Loosen the bolt D 3 rings using 5mm socket head
wrench, then rotating axis C, adjusting the location of the
scoring blade, tighten bolt D at last.(5.1.3)
5.2 EXTENSION TABLE FLATNESS ADJUSTMENT
WARNING
WARNING
WARNING
