6.2.1 Manual operation panel
6.2.1
6.2.1.1
6.2.1.2
- Rip fence cutting display column
- Switch status display columm
- Main blade lifting display column
- Main blade tilt display column
-Distance “L“ between fence and blade
-Fence moving distance “
△
L”
-Distance between fence zero position
and main blade
-Manual setting distance between
fence zero and main blade
-Moving fence to the right position
-Increment with fence moving
-Fence stop moving
-Fence searching zero automaticaly
-Setting practical distance from fence
to blade
When use this machine for the first time or the parameters of saw blade tilt, saw blade lifting and
rip fence has discrepancy to the practical, enter manual operation panel and click
in the box of saw tilt, saw up-down and positioning fence to calibration in turn.
Otherwise, the machine cannot work properly.
●
Fence Operation panel (6.2.1.1)
L
-
꒫
L
+
꒫
L
Click button, ensure no
collision risk when back to the zero
stroke, next click "OK" button in the
dialogue of "SCut".
System status shows , the machine can work properly;
- Safety switch is open, shows red alert status, the machine can work after release alarm.
- If the rip fence has collision risk with the saw blade guard and saw blade, alarm shows in the
operation panel, the rip fence can work after release alarm
●
Manual Operation panel (6.2.1)
WARNING
WARNING
WARNING
-23-
