-22-
6. OPERATING PROCEDURES
Please be careful to operate the machine while saw blade
is running and always DO NOT use the machine unless
all the guards and safety devices are normal.
6.1 Panel keys
Panel keys like Figure 6.1
A- Operation panel
B- Main blade start button
C- Scoring blade start button
D- Blade stop button
E- Cutting next step button
F- Main blade elevating button
G- Main blade tilt button
H- Power supply indicate light
I- Scram button
J- Main power control switch
K- Scram button
6.2
Main operation panel
6.1
B
C
D
E
F
G
H
I
A
J
K
6.2
- Power on
Switch on main power control switch J, indicate light H works accordingly, then operation panel shows WINDOWS
desktop, double click “SCut.exe” to access main operation interface.
System main program locates in “For jinling xx” file under the inventory of C disk. The operation interface can also be
opened through “SCut.exe” under the inventory of C disk
- Power off
Click main operation panel interface button, then turn off the computer through “start” menu. Power off main
power control switch J. Finally disconnect the power
。
Please make sure the right shut down procedure, Power off the main electric control switch after
turning off the computer to avoid obliterated data.
- Layout optimization panel
- Manual operation panel
- Automatic cutting panel
- Parameters operaiton panel
- System information display panel
- Quit system
- Soft keyboard start button
- System status display bar
- Emergency status display bar
- Back to the zero status display bar
- Rip fence collision alarm display bar
- Main saw blade speed display bar
- The fence absolute position display bar
CAUTION
WARNING
