TotalFlow XRC6490, Руководство пользователя

Страница: 260 / 342

A-144
ARRAY.REGISTER DESCRIPTION
USAGE GROUP NAME
0.44 Aux contact 1 current state Read Only None
0.45 Aux contact 1 manual set Read/Write None
0.46 Aux contact 2 re-open interval Read/Write None
0.47 Aux contact 2 current state Read Only None
0.48 Aux contact 2 manual set Read/Write None
0.49 Remote Sense Action Read/Write None
0.50 Remote Sense State Read Only None
0.51 Events Available Write, Canadian Event Log None
0.52 Aux Contact 1 select bits low
byte Read/Write, see note 5) None
0.53 Aux Contact 2 select bits low
byte Read/Write, see note 5) None
0.54 Hold tube analog inputs Read/Write None
0.55 Static pressure absolute/gauge
select Read/Write, 0=absolute,
1=gauge None
0.56 Number of samples before AD
Fail Set or Released For Internal Use Only None
0.57 Current number of consecutive
bad AD readings For Internal Use Only None
0.58 Vol period Complete flag Read/Write (see note 6) None
0.59 Log period Complete flag Read/Write (see note 7) None
0.60 Day period Complete flag Read/Write (see note 8) None
0.61 tubeCheckPoint control Read/Write (see note 9) None
0.62 Canadian Event Log Inhibit
Flag Read Only (see note 10) None
0.63 Stop Logging Events Read Only (See Note 11) None
0.64 Log in Gage Pressure Read/Write (See Note 12) None
0.65 Log DP Check Read/Write (See Note 18) None
0.66 Use fixed Sp on Error Read/Write (See Note 19) None
0.67 Use fixed Dp on Error Read/Write (Notes 19 & 20) None
0.68 Use fixed Tf on Error Read/Write (See Note 19) None
6.0 AGA-7 Factor Select Bits Read/Write, See note 13) None
6.1 Misc Select Bits Read/Write, See note 14) None
6.2 Units scale selection for
uncorrected vol units Read/Write, See note 15) None
6.3 Units scale selection for
corrected volume units Read/Write, See note 16) None
6.4 Units scale selection for flow
rate units Read/Write, See note 17) None
6.5 AGA7 test Calculations Write None
6.6 Heating Value Select 0=Vol
Based 1=Mass Based Read/Write None
6.7 Last Calc Heat Value Select Read Only Not used None
6.8 1 = unitTable was changed Internal Only None
6.9 1 = busy moving use files Internal Only None