TotalFlow XRC6490, Руководство пользователя

Страница: 272 / 342

A-156
Tube Last Calculation Period Analysis Registers, Floating Point, Read Only
ARRAY.REGISTER DESCRIPTION
USAGE GROUP NAME
10.0 Last Calc Nitrogen Read Only Mole Percent
10.1 Last Calc Carbon Dioxide Read Only Mole Percent
10.2 Last Calc Hydrogen Sulfide Read Only Mole Percent
10.3 Last Calc Water Read Only Mole Percent
10.4 Last Calc Helium Read Only Mole Percent
10.5 Last Calc Methane Read Only Mole Percent
10.6 Last Calc Ethane Read Only Mole Percent
10.7 Last Calc Propane Read Only Mole Percent
10.8 Last Calc Normal Butane Read Only Mole Percent
10.9 Last Calc Iso-Butane Read Only Mole Percent
10.10 Last Calc Normal Pentane Read Only Mole Percent
10.11 Last Calc Iso-Pentane Read Only Mole Percent
10.12 Last Calc Normal Hexane Read Only Mole Percent
10.13 Last Calc Normal Heptane Read Only Mole Percent
10.14 Last Calc Normal Octane Read Only Mole Percent
10.15 Last Calc Normal Nonane Read Only Mole Percent
10.16 Last Calc Normal Decane Read Only Mole Percent
10.17 Last Calc Oxygen Read Only Mole Percent
10.18 Last Calc Carbon Monoxide Read Only Mole Percent
10.19 Last Calc Hydrogen Read Only Mole Percent
10.20 Last Calc Argon Read Only Mole Percent
10.21 Last Calc Air Read Only Mole Percent
10.22 Last Calc Heavy Hydrocarbons Read Only Mole Percent
10.23 Last Calc Heat Content Read Only, BTU/SCF See note 1)
10.24 Last Calc Specific Gravity Read Only None
1.
The group depends on the heating value selected. For energy/mass the group is HVMass_grp.
For energy/volume the group is HVVolume_grp.
Tube Use File Units Get Registers (11.0 … 11.63):
This read only register returns the units string that a usefile group is currently set to. The format of
the command is app.11.group number. Where group number
range from “0” to MAX_GROUPS-1
(currently “63” for a usefile).
Tube Use File String Register (12.0 … 12.63):
This read only register returns the register number that will return the units a usefile group is
currently set. The format of the command is app.12.group number. Where group number
range from
“0” to MAX_GROUPS-1 (currently “63” for a usefile). A typical response would be app.11.group
number.
Tube Use File Units Get Registers (13.0 .. 13.63):
This read only register returns the group name, as a string, assigned to usefile group. The format of
the command is app.13.group number. Where group number
range from “0” to MAX_GROUPS-1
(currently “63” for a usefile).
Tube Use File Image Register (14.0 … 14.63):