Total Control MP/16, Руководство оператора

Страница: 173 / 182

Technical Specifications G-5
+FRS=n (0,255) Wait for silence, 10 ms.
+FTM=n (3,24,48,72,73,74,96,121,122,145,146)
Transmit data with carrier
+FRM=n (3,24,48,72,73,74,96,121,122,145,146)
Receive data with carrier
+FTH=n (3,24,48,72,73,74,96,121,122,145,146)
Transmit HDLC data with carrier
+FRH=n (3,24,48,72,73,74,96,121,122,145,146)
Receive HDLC data with carrier
FAX service class 2.0 commands
Class 2.0 fax commands are too numerous to be listed here. For
information on Class 2.0 technical specifications, contact Global
Engineering Documents, at 1-800-854-7179. The document that
covers this information is:
ANSI/EIA/TIA-592-1993 (EIA-592)
Asynchronous Facsimile DCE Control Standard
May, 1993
Optional Class 2.0 FAX commands supported
Modems support the following optional Class 2.0 fax commands:
+FNS=0,1 Pass-through non-Standard negotiation
byte string
+FCR=0,1 Capability to receive
+FAA=0,1 Adaptive Answer mode
+FCT=0-255 sec. Phase C Timeout
+FHS=0-255 Hangup Status Code, read only
+FMS=0-3 Minimum Phase C Speed
+FBS?=500,100 Buffer size, read only
Answer Tone Detector
2200-2300 Hz
Loss of Carrier (Disconnect Timer)
0.7-sec. default, programmable 0.2-25.5 sec.
Equalization
Adaptive