Total Control MP/16, Руководство оператора

Страница: 123 / 182

Using AT Commands C-9
Remote Configuration Commands
Here are the commands only used during remote access.
%B n Configure the modem's serial port rate.
%B0 110 bps %B6 9600 bps
%B1 300 bps %B7 19,200 bps
%B2 600 bps %B8 38,400 bps
%B3 1200 bps %B9 57,600 bps
%B4 2400 bps %B10 115,200 bps
%B5 4800 bps
%F n Configure data format.
%F0 No parity, 8 data bits.
%F1 Mark parity, 7 data bits.
%F2 Odd parity, 7 data bits.
%F3 Even parity, 7 data bits.
Ending a Remote Access Session
One of the four commands below can be used to end a remote
access session.
♦
<Ctrl>-C aborts the login procedure.
♦
ATZ resets the modem and terminates the connection.
♦
ATH terminates the connection.
♦
ATO ends the remote access session, but the modems remain
online.
A remote access session automatically times out after 3 minutes of
no activity.