Total Control MP/16, Руководство оператора

Страница: 131 / 182

AT Command Reference D-7
No Prompting in Sync: The originating modem did not send an
autopass password, and the answering modem cannot
prompt for a password in any synchronous mode.
Non-ARQ Mode: The modem hung up because the originating
modem was set for error control and the answering modem
was set for non-error control.
Mode Incompatible: The modem hung up because both modems
were not set to the same error control setting.
No Prompting in Non-ARQ: Prompting was enabled, but the
modem hung up because the originating modem was set for
error control, and the answering modem was set for non-
error control. The answering modem cannot prompt when it
is set for non-error control.
K n
Modem clock operation : Call duration or Real-time mode.
Displayed with ATI3 and ATI6 commands.
K0 Default. Display current call duration if online. Display last
call duration if offline. The modem times each call from
CONNECT to NO CARRIER, and stores the information
until the next connection or until the modem is reset.
K1 Return actual time. Clock is set using ATI3=HH:MM:SS K1.
O n Return online from Online Command mode.
ATO0 Return online.
ATO1 Return online and retrain. Use to have the modem
re-synchronize if there were errors in a non-ARQ data
transfer.
Q n
Result codes. Overrides DIP switch 3 until power on/reset.
Q0 Result codes displayed.
Q1 Result codes suppressed (quiet).
Q2 Result codes suppressed in Answer mode only.
S r = n
Set S-Register value:
r
is any S-Register;
n
must be a decimal
number between 0 and 255.
S r.b = n Set bit-mapped registers: r is the bit-mapped register; . b is the bit; n
is 0 (off) or 1 (on).
S r ?
Query contents of S-Register. Variable r is the register to be
checked.