Total Control MP/16, Руководство оператора

Страница: 125 / 182

AT Command Reference D-1
Appendix D AT Command
Reference
Basic Command Set
+++ Escape code. Must be preceded and followed by one second of no
transmission. Do not use the AT prefix or press Enter. If
necessary, the character used in the escape code and the dura tion
of the guard time can be changed by resetting Register S2 and S12.
DIP Switch 9 Response to +++
OFF Modem goes on hook (hangs up), sends NO
CARRIER result code.
ON Modem maintains connection (Online-Command
mode), sends OK result code (Factory setting).
Return online by sending
ATO
.
> Repeat command. Add at the end of a command to repeat that
command continuously. Include in a Dial string, as follows:
AT > DT 1234567 <Enter> or
AT DT 1234567 > <Enter>
The modem enters Repeat mode, dials the number, waits 60
seconds for a carrier (default), and hangs up. Then after a two-
second pause, it redials. The cycle continues until the modems
connect or the modem reaches a maximum of 10 attempts.
A
Force Answer mode to receive an incoming call.
A/
Re-execute the last issued command. A/ doesn't take the AT prefix
or a Carriage Return, and can be used to redial.
A>
Repeat continuously. Modem repeats last issued command or dial
string. Abort using any key. Dial string aborts after 10 attempts.
AT
Attention command prefix. Returns OK result code. AT must
prefix all commands except A/, A> and +++.