Total Control MP/16, Руководство оператора

Страница: 143 / 182

AT Command Reference D-19
Register Default Function
S8 2 Sets the duration, in seconds, for the pause (,) option
in the Dial command and the pause between
command re-execu tions (> and A> commands).
S9 6 Sets the required duration, in tenths of a second, of
the remote modem's carrier signal before recognition
by the MP/16 modem.
S10 7 Sets the duration, in tenths of a second, that the
modem waits after loss of carrier before hanging up.
This guard time allows the modem to distinguish
between a line hit or other disturbance that
momentarily breaks the connection, from a true
discon nect (hanging up) by the remote modem.
S11 70 Sets the duration and spacing, in milliseconds, of
dialed tones.
S12 50 Sets the duration, in fiftieths of a second, of the
guard time for the escape code (+++) sequence.
S13 0 Bit-mapped register. Select the bit(s) you want ON
and set to the total of the values in the Value column.
Bit Value Result
0 1 Reset when DTR drops
1 2 Reverse normal Au to Answer
operation: on incoming RING, enter
Originate Mode and look for Answer
tone
2 4 Disable 250 msec. pause before result
code display
3 8 On DTR signal, Auto Dial the number
stored in NVRAM at position 0
4 16 At power on/reset, Auto Dial number
stored in NVRAM at position 0
5 32 Reserved.
6 64 Disable MNP Level 3 (used for testing
Level 2)
7 128 Custom applications