Toshiba e-studio2309a, Руководство пользователя

Страница: 21 / 236

1.PREPARATION
Preparation 1 - Turning Power ON 19
1 PREPARATION

Saving energy when not in use - Energy saving mode -
To reduce power consumption, the equipment automatically enters into the energy saving mode when a
specified period of time has passed since its last use.

Types of energy saving mode
Low power mode: “SAVING ENERGY” appears on the LCD screen.
The equipment automatically enters into low power mode when a specified period of time
elapses.
Sleep mode: The LCD screen is turned off and only [ENERGY SAVER] is lit.
The equipment enters into sleep mode when a specified period of time elapses or the
[ENERGY SAVER] button is pressed.
 When “Status Monitor” is running, the equipment does not enter into the sleep mode. If you want to
enable the sleep mode, exit it out.
 P.82 “Status Monitor”
 This equipment does not enter sleep mode when the Wireless LAN Module is installed.
The timers for “AUTO POWER SAVE” and “SLEEP MODE” have been set respectively as the factory
default settings. You can change them in the “USER FUNCTIONS” menu.
 P.179 “User Functions Menu List”
 To turn the equipment into the energy saving mode (Sleep mode) manually
Press [ENERGY SAVER].
Canceling conditions for energy saving mode
The energy saving mode is canceled under the following conditions.
 When [ENERGY SAVER], [START], [COPY], [SCAN], or [FAX] on the control panel is pressed.
- For the low power mode: Press [ENERGY SAVER], [START], [COPY], [SCAN], or [FAX]
- For the sleep mode: Press [ENERGY SAVER]
Press [ENERGY SAVER] for at least 0.5 seconds.
 When printing or scanning is performed from a PC connected with this equipment.
 When fax data is received.