Toshiba DeviceNet nv Series Скачать руководство пользователя страница 9

Страница: 9 / 159

Unified Controller nv Series DeviceNet Module DN611B Instruction Manual

vii

Restrictions on Application



This product is not developed and manufactured for use in systems including devices fatal to humans

(Note 1),

and thus must not be used for such purposes.



If you intend to use this product in a system including devices that significantly affect human safety or

maintenance of public functions (Note 2), special consideration (Note 3) is required in system operation,

maintenance, and management. In this case,

please consult with our sales representative.

(Note 1) Devices that are directly related to human lives includes the following:

• Medical devices such as life-support devices and devices for surgical units

(Note 2) Systems including devices that significantly affect human safety or maintenance of public

functions include the followings.

• Main control system of a nuclear power plant, the safety and protection system of a

nuclear power facility, and other lines and systems important to safety

• Operation control systems of mass transportation system and air traffic control systems

(Note 3) Special consideration means to build a safety system (foolproof design, fail safe design,

redundancy design, etc.) in full consultation with Toshiba

’s engineers.

Disclaimer



Toshiba Infrastructure Systems & Solutions Corporation is not liable for any loss caused by earthquake,

thunder, wind, flood, fire not our responsibility, action by a third party, other accidents, customer

’s

intention or negligence, incorrect use, or use under abnormal condition.



Toshiba Infrastructure Systems & Solutions Corporation shall not be responsible for any incidental

damage (loss of business profits, interruption of business, change/loss of data on memory, etc.) caused

by use of or inability to use this product.



Toshiba Infrastructure Systems & Solutions Corporation shall not be responsible for any damage caused

by operation performed against any instructions stated in the instruction manual.



Toshiba Infrastructure Systems & Solutions Corporation shall not be responsible for any damage caused

by malfunctions due to combination with the connected devices.



Toshiba Infrastructure Systems & Solutions Corporation shall not be responsible for any damage caused

by malfunctions due to combination with an application program created by the customer.

Содержание DeviceNet nv Series
































































































































































Результаты поиска

Содержание DeviceNet nv Series

Отзывы:

Toshiba DeviceNet nv Series, Инструкция по эксплуатации, Страница: 9 / 159

Результаты поиска

Содержание DeviceNet nv Series

Отзывы: