Toro Multi Pro 41240, Руководство оператора

Страница: 85 / 96

4. Assemble the rate control valve manifold,
gasket, and agitation-valve manifold with a
flange clamp and tighten by hand (
Figure 126 A).
5. Assemble the rate control valve to the valve
mount with the 2 flanged-head bolts and 2
flanged locknuts (
Figure 126 A) that you removed
in step 3 of Removing the Rate Control Manifold
Valve (page 78) , and torque the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
6. Assemble the outlet fitting onto the coupling
fitting at the bottom of the manifold for the rate
control valve (
Figure 126 B).
7. Secure the outlet fitting coupling fitting by
inserting a retainer into the socket of the outlet
fitting (
Figure 126 B).
8. If you loosened the mounting hardware for the
pressure filter head, tighten the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
Installing the Agitation Manifold
Valve
1. Align the flange of the agitation-valve manifold,
a gasket, and the flange of the agitation bypass
valve (
Figure 127 ).
Note:
If needed, loosen the mounting hardware
for the master-boom valve as needed to provide
clearance.
g033604
Figure 127
1. Flanged-head bolt (1/4 x
3/4 inch) 5. Flange clamp
2. Gasket 6. Valve mount
3. Manifold (agitation valve) 7. 3-pin connector (valve
actuator—agitation valve)
4. Flanged locknut (1/4 inch)
2. Assemble the agitation bypass valve, gasket,
and agitation-valve manifold with a flange clamp
and tighten by hand (
Figure 128 ).
3. Align a gasket between the flanges of the rate
control valve and the agitation-valve manifold
(
Figure 128 A).
g033605
Figure 128
1. Flange (rate control valve) 5. Coupling (manifold-valve)
2. Flange (master-boom
valve) 6. Socket (outlet fitting)
3. Flange clamp 7. Retainer
4. Gasket
85