Toro Multi Pro 41240, Руководство оператора

Страница: 86 / 96

4. Assemble the rate control valve, gasket, and
agitation-valve manifold with a flange clamp and
tighten by hand (
Figure 128 A)
5. Align a gasket between the flanges of the
agitation-valve manifold and the master-boom
valve (
Figure 128 A)
6. Assemble the agitation-valve manifold, gasket,
and master-boom valve with a flange clamp and
tighten by hand (
Figure 128 A)
7. Assemble the outlet fitting onto the coupling
fitting at the at the bottom of the manifold for the
agitation valve (
Figure 128 B)
8. Secure the outlet fitting to the coupling fitting by
inserting a retainer into the socket of the outlet
fitting (
Figure 128 B)
9. Assemble the agitation valve to the valve mount
with the flanged-head bolt and flanged locknut
(
Figure 127 ) that you removed in step 3 of
Removing the Agitation Manifold Valve (page
79)
, and torque the nut and bolt to 10 to 12 N∙m
(90 to 110 in-lb).
10. If you loosened the mounting hardware for the
master-boom valve, tighten the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
Installing the Master Boom
Manifold Valve
1. Align the flange of the master-boom-valve
manifold, a gasket, and the flange of the
master-boom bypass valve (
Figure 129 ).
g033590
Figure 129
1. Flange (agitation valve) 4. Flange clamp
2. Flange
(bypass—master-boom
valve) 5. Gasket
3. Manifold (master-boom
valve) 6. 3-pin connector (valve
actuator—master-boom
valve)
2. Assemble the master-boom valve manifold,
gasket, and master-boom bypass valve with a
flange clamp tightened hand tight (
Figure 129 ).
3. Align the flange of the master-boom-valve
manifold, a gasket, and the agitation-valve
manifold (
Figure 129 ).
4. Assemble the master-boom-valve manifold,
gasket, and agitation-valve manifold with a
flange clamp and tighten by hand (
Figure 129 )
5. Align the socket of the 90° outlet fitting onto
the coupling fitting at the at the bottom of the
manifold for the master-boom valve (
Figure
130 ).
86