20
Storing the Jack Stands
(Optional)
Parts needed for this procedure:
2
Front jack stand
2
Rear jack stand
4
Cotter pin
2
Clevis pin (4-1/2 inches)
2
Clevis pin (3 inches)
2
Knob
Procedure
1.
Insert the front jack stands upside down into the
frame near the front tie-down points (
).
g023740
Figure 49
1.
Front jack stand
2.
Knob
2.
Secure the front jack stands with 2 clevis pins
(3 inches) and 2 cotter pins through the middle
hole on the stands.
3.
Insert the rear jack stands from the bottom, up
into the frame, near the rear tie-down points
(
).
g023739
Figure 50
1.
Rear jack stand
4.
Secure the rear jack stands with 4 clevis pins
(4-1/2 inches) and 4 cotter pins through the last
hole on the stands.
34
