g028857
Figure 56
1.
Sprayer pump
Specifications
Note:
Specifications and design are subject to
change without notice.
Spray system base weight
(vehicle weight not included)
424 kg (935 lb)
Tank capacity
757 L (200 US gallons)
Overall vehicle length with the
standard spray system
422 cm (166 inches)
Overall vehicle height with
standard spray system to the
top of the tank
147 cm (58 inches)
Overall vehicle height with
standard spray system and
the booms stored in the X
pattern
234 cm (92 inches)
Overall vehicle width with the
standard spray system and
the booms stored in the X
pattern
175 cm (69 inches)
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
authorized Toro distributor.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Note:
If you need to transport the vehicle on a trailer
with the sprayer installed, make sure that the booms
are tied down and secure.
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Before you leave the operator’s position, do the
following:
– Park the machine on a level surface.
– Shift the transmission into the N
EUTRAL
position
(manual) or the P
ARK
position (automatic).
– Engage the parking brake.
– Shut off the engine and remove the key (if
equipped).
– Wait for all movement to stop.
•
Know how to stop the machine and shut off the
engine quickly.
•
Check that operator-presence controls, safety
switches, and guards are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
If the machine does not function correctly or is
damaged in any way, do not use the machine.
Correct the problem before you operate the
machine or attachment.
•
Ensure that all fluid line connectors are tight and
that all hoses are in good condition before applying
pressure to the system.
Chemical Safety
Chemical substances used in the sprayer system
may be hazardous and toxic to you, bystanders, and
animals, and they may damage plants, soil, and other
property.
•
Read the information on each chemical. Refuse to
operate or work on the sprayer if this information
is not available.
38
