Toro Multi Pro 41240, Руководство оператора

Страница: 19 / 96

5. Insert the 2 plastic bushings into the mounting
bracket (
Figure 18 ).
Installing the Control Console to
the Machine
1. Remove the hairpin securing the pivot pin of the
control console to the storage bracket on the
sprayer tank.
2. Install the control console onto the control
mounting bracket and secure the control console
with the spring-clip pin (
Figure 19 ).
Note:
Ensure that the spring clip is rotated over
the pivot pin to positively secure the spring-clip
pin.
g033521
Figure 19
1. Spring-clip pin 3. Control mounting bracket
2. Pivot pin (control console) 4. Hand knob
3. Install the hand knob and tighten it to prevent the
console from rotating during operation (
Figure
19 ).
10
Installing the Electrical
Harnesses for the Sprayer
Parts needed for this procedure:
3 J-clips
1 Bolt (1/4 x 3/4 inch)
1
Flange nut (1/4 inch)
Routing the Rear Electrical
Harness for the Sprayer to the
Control Console
1. Install 2 J-clips in the center console at the
points located in
Figure 20 or Figure 21 using
the existing screws.
g002507
Figure 20
HD-Series models with a manual transmission
1. J-clip 3. Control-box harness
2. Existing screws 4. Center console
19