Installing the Jack Stands
Lifting equipment capacity:
408 kg (900 lb)
1.
Align the front jack stand with the jack stand
receiver at the front of the tank (
g028422
Figure 135
1.
Clevis pin (1/2 x 3 inches)
4.
Hairpin (5/32 x 2-5/8
inches)
2.
Jack-stand receiver
5.
Front jack stand
3.
Lock knob
2.
Insert the jack stand into the receiver until the
middle hole in the horizontal jack stand tube is
aligned with the hole in the top of the receiver
(
).
3.
Insert the clevis pin (1/2 x 3 inches) into the
holes in the jack stand and receiver and secure
the clevis pin with a hairpin (5/32 x 2-5/8 inches).
4.
Thread a lock knob into the receiver and tighten
the knob by hand (
).
5.
Align the rear jack stand with the rear jack-stand
receiver (
g028423
Figure 136
1.
Hairpin (5/32 x 2-5/8
inches)
3.
Jack-stand receiver
2.
Clevis pin (1/2 x 4-1/2
inches)
4.
Rear jack stand
6.
Align the hole in the top of the jack stand with the
hole in the frame of the tank skid (
)
7.
Secure the jack stand to the receiver and the
frame with 2 clevis pins (1/2 x 4-1/2 inches) and
2 hairpins (5/32 x 2-5/8 inches) as shown in
8.
Repeat steps
through
for the front and rear
jack stands at the other side of the tank skid.
91
