Multi Pro Workman Turf Sprayer
Finishing Kit (HDX-Auto Model)
HDX-Automatic Series Workman models, complete
the steps in the Multi Pro WM Turf Sprayer Finishing
Kit for Automatic Workman Utility Vehicles; refer to
the Installation Instructions for the Multi Pro WM Turf
Sprayer Finishing Kit, Automatic Workman Utility
Vehicle.
3
Installing the Hold-Down
Brackets for the Tank Skid
Parts needed for this procedure:
2
Hold-down brackets
Procedure
1.
Remove the 2 rear flange-head bolts and 2
flange locknuts that secure the support bracket
for the engine tube to the frame of the machine
(
).
Note:
Retain the fasteners for later use.
g028410
Figure 6
1.
Rear hole—support
bracket (engine tube)
4.
Engine support tube
2.
Flange locknut
5.
Lift cylinder
3.
Flange-head bolt
2.
Rotate the lift cylinder to provide clearance to
install the hold-down bracket for the tank skid
(
).
3.
Assemble the hold-down brackets to support
bracket and frame the using the 2 flange-head
bolts and flange locknuts removed in step
(
).
g028421
Figure 7
1.
Support bracket (engine
tube)
3.
Flanged-head bolts
2.
Hold-down bracket (tank
skid)
4.
Lift cylinder
4.
Torque the bolts and nuts to 91 to 113 N∙m (67
to 83 ft-lb).
5.
Repeat steps
to
at the opposite side of the
machine.
13
