Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Remove the existing bed.
Rear PTO Kit, Heavy-Duty Workman
Vehicle (HD-Series Models with a
Manual Transmission)
1
High-Flow Hydraulics Kit,
Workman HDX-Auto Utility Vehicle
(Non-TC—HDX-Auto Model)
1
Multi Pro WM Turf Sprayer Finishing
Kit, Manual Workman Utility Vehicle
(HD-Series Models with a Manual
Transmission)
1
2
Multi Pro WM Turf Sprayer Finishing
Kit, Automatic Workman Utility Vehicle
(HDX-Auto Model)
1
Prepare to install the center boom
section.
3
Hold-down brackets
2
Install the attachment hold-down
brackets.
Tank and skid assembly
1
Clevis pins
2
Tapered clevis pin
2
Hairpins
2
Lynch pins
4
Bolt (1/2 x 1-1/2 inches)
2
4
Nuts (1/2 inch)
2
Install the tank skid.
5
No parts required
–
Assemble the drain valve.
6
No parts required
–
Disconnect the battery.
7
No parts required
–
Connect the speed sensor harness.
8
No parts required
–
Couple the sprayer pump.
Console mounting bracket
1
Flange locknut (5/16 inch)
3
Flange-head bolt (5/16 inch)
3
Plastic bushing
2
Control console
1
Spring-clip pin
1
9
Hand knob
1
Install the control console to the
machine.
J-clips
3
Bolt (1/4 x 3/4 inch)
1
10
Flange nut (1/4 inch)
1
Install the control console onto the
machine.
11
Fuse decal (127–3966)
1
Install the control console and the
electrical harness.
9
