Toro Multi Pro 41240, Руководство оператора

Страница: 48 / 96

InfoCenter Advisories
Operator advisories automatically display on the
InfoCenter screen when a machine function requires
additional action. For example, if you attempt to
start the engine while pressing the traction pedal, an
advisory displays indicating that the traction pedal
must be in the N
EUTRAL
position.
For each advisory that occurs, the fault indicator
flashes, and an advisory code (number), an advisory
description, and an advisory qualifier appears on the
screen as shown in
Figure 75 .
Advisory descriptions and qualifiers appear as
InfoCenter icons. Refer to
InfoCenter Icons (page 42)
for a description of each icon.
Note:
An advisory qualifier explains the conditions
that triggered the advisory and provides instructions
on eliminating the advisory.
g202867
Figure 75
1. Fault indicator 3. Advisory description
2. Advisory qualifier
4. Advisory code
Note:
Advisories do not log into the fault log.
Note:
You can clear an advisory from the display
screen by pressing any of the InfoCenter keys.
Refer to the table that follows for the InfoCenter
advisories:
Advisories
Advisory Code Description
200 Start prevented—pump switch active
201 Start prevented—not in N
EUTRAL
202 Start prevented—out of seat
203 Start prevented—throttle pedal is not home
204 Start prevented—starter engage timeout
205 Parking brake is engaged
206 Pump start prevented—boom active
Advisories (cont'd.)
Advisory Code Description
207 Pump start prevented—engine speed high
208 Throttle/speed lock prevented—pump is not
active
209 Throttle lock prevented—parking brake is
not engaged
210 Speed lock prevented—operator not in seat
or parking brake is engaged
211 Throttle/speed lock prevented—clutch or
service brake is engaged
212 Tank low volume alert
213 Rinse pump O
N
220 Flow sensor calibration
221 Flow sensor calibration—fill water in tank
and enter volume filled
222 Flow sensor calibration—turn on the pump
223 Flow sensor calibration—turn on all the
booms
224 Flow sensor calibration—calibration
commenced
225 Flow sensor calibration—calibration
complete
226 Flow sensor calibration—exiting calibration
mode
231 Speed sensor calibration
232 Speed sensor calibration—fill the
fresh-water tank, press next
233 Speed sensor calibration—fill the sprayer
half full of water, press next
234
Speed sensor calibration—enter the
calibration distance, press next
235 Speed sensor calibration—mark and drive
the entered distance with sprayer sections
off
236 Speed sensor calibration—speed sensor
calibration in progress
237 Speed sensor calibration—speed sensor
calibration complete
238
Speed sensor calibration—turn off the
booms
241 Calibration out of bounds, using default
48