Tonghui Electronics TH2826/A, Руководство по эксплуатации

Страница: 120 / 146

TH2826 Operation manual Ver1.0
◇ 112
return
：
<NR1><NL^END>
:SHORt
is used to perform the short correction data of 41 preset test points.
command syntax
：
CORRection:SHORt
e.g.
：
WrtCmd(“CORR:SHOR”)
:SHORt:STATe
is used to set the short correction function. Char ‘?’ is used to query the state
of the short correction.
Command syntax :
ON
CORRection:SHORt:STATe OFF
1
0
char ‘1’(49):enable the short correction, which is equivalent to ON.
char ‘0’(48):forbid the short correction, which is equivalent to OFF.
e.g. ： WrtCmd(“CORR:SHOR:STAT ON”)
query syntax ： CORRection:SHORt:STATe?
return
：
<NR1><NL^END>
:LOAD:STATe
is used to set the load correction function. Char ‘?’ is used to query the state of
the load correction.
command syntax
：
ON
CORRection:LOAD:STATe OFF
1
0
char ‘1’(49):enable the load correction, which is equivalent to ON.
char ‘0’(48):forbid the load correction, which is equivalent to OFF.
e.g.
：
WrtCmd(“CORR
：
LOAD
：
STAT ON”)
query syntax
：
CORRection:LOAD:STATe?
return ： <NR1><NL^END>
:LOAD:TYPE
is used to set the combination parameter function for the load correction. Char
‘?’is used to query the type of the combination parameter.
Fuction
：
CPD: set the function to Cp-D LPRP: set the function to Lp-Rp
CPQ: set the function to Cp-Q LSD : set the function to Ls-D