Tonghui Electronics TH2826/A, Руководство по эксплуатации

Страница: 121 / 146

TH2826 Operation manual Ver1.0
◇ 113
CPG: set the function to Cp-G LSQ: set the function to Ls-Q
CPRP: set the function to Cp-Rp LSRS: set the function to Ls-Rs
CSD: set the function to Cs-D RX: set the function to R-X
CSQ: set the function to Cs-Q ZTD : set the function to Z- θ °
CSRS: set the function to Cs-Rs ZTR : set the function to Z- θ r
LPQ: set the function to Lp-Q GB: set the function to G-B
LPD : set the function to Lp-D YTD: set the function to Y- θ °
LPG: set the function to Lp-G YTR: set the function to Y- θ r
e.g.
：
WrtCmd(“CORR:LOAD:TYPE CPD”)
query syntax
：
CORRection:LOAD:TYPE?
return ： <function><NL^END>
:SPOT<n>:STATe
is used to set the particular frequency point. Char ‘?’ is used to query the
state of the current frequency point(frequency 1, frequency 2 or frequency
3.)
command syntax ：
ON
CORRection:SPOT<n>:STATe OFF
1
0
char ‘1’(49) is equivalent to ON
char ‘0’(48) is equivalent to OFF
<n>:
1:frequency point 1
2:frequency point 2
3:frequency point 3
e.g.
：
WrtCmd(“CORR:SPOT1:STAT ON”)
query syntax
：
CORRection:SPOT<n>:STATe?
return
：
<NR1><NL^END>
:SPOT<n>:FREQuency
is used to set the frequency of the particular frequency point 1, 2 and
3. char ‘?’ is used to query the current frequency of the frequency point.
command syntax
：
CORRection:SPOT<n>:FREQuency <value>