Thermo Scientific TEOM 1405, Руководство пользователя

Страница: 42 / 190

S S S S S
ECTION ECTION ECTION ECTION ECTION
2 2 2 2 2
S
ETUP AND
I
NSTALLATION
2-22 O
PERATING
G
UIDE
, TEOM 1405 T
HERMO
F
ISHER
S
CIENTIFIC
12. Cut a piece of tubing from the remaining section of bypass tubing (step
8) long enough to reach from the bypass connection to the top of the
1405 unit. The section should be long enough to include a loop (Figure
2-26) to ensure there will be no kinks in the line when it enters the
enclosure. Connect the bypass tubing to the bypass fitting on the flow
splitter using the 3/8-inch Swagelok fitting (Figure 2-26). Insert the
other end through the fitting on the roof (Figure 2-24) and into the
enclosure about 4 to 6 inches. Connect the coiled tubing from the
water trap filter to the bypass line near the top of the shelter with the
quick-connect fitting. Ensure that the coiled water trap tubing is
vertical (Figure 2-18).
Figure 2-26. Figure 2-26. Figure 2-26. Figure 2-26. Figure 2-26.
Virtual impactor,
temperature/humidity sensor
and sample tubes.
Flow splitter
Bypass connection
Temperature/humidity
sensor