manualshive.com logo in svg

Thermo Scientific Surveyor PDA Plus, Руководство по оборудованию

Поделиться
Скачать
Thermo Scientific Surveyor PDA Plus Скачать руководство пользователя страница 2

© 2013 Thermo Fisher Scientific Inc. All rights reserved. 

Foundation and Xcalibur are registered trademarks and ChromQuest, Surveyor Plus, and LightPipe are 
trademarks of Thermo Fisher Scientific Inc in the United States. 

Teflon is a registered trademark of E. I. du Pont de Nemours and Company in the United States and other 
countries. Windows is a registered trademark of Microsoft Corporation is the United States and other 
countries. 

PEEK is a trademark of Victrex PLC.

Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the 
product operation. This document is copyright protected and any reproduction of the whole or any part of this 
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.

The contents of this document are subject to change without notice. All technical information in this 
document is for reference purposes only. System configurations and specifications in this document supersede 
all previous information received by the purchaser. 

This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This 
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of 
Sale shall govern all conflicting information between the two documents.

Release history: Revision A, Apr 2005; Revision B, May 2006; Revision C, Sep 2006; Revision D, Mar 2008; 
Revision E, Jan 2009; Revision F, Dec 2013

This revision contains cosmetic changes only. The cosmetic changes include a new title page and chapter icon. 
In addition, the pagination might differ slightly from the last revision.

Software version: Xcalibur 2.0 and later or ChromQuest 4.2 and later 

For Research Use Only. Not for use in diagnostic procedures.

Содержание Surveyor PDA Plus









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды