Thermo Scientific STERI-CYCLE i160, Руководство пользователя

Страница: 29 / 200

2
Installation of the device
Stacking
Thermo Scientific
S
TERI-CYCLE
i160
/
i250
2-5
S
TERI-CYCLE
i160
and
S
TERI-CYCLE
i250
:
1. Place the lower unit with the device stands (3/ Figure 2-4 ) on the stacking elements (1/ Figure 2-4
on top of the mobile base rack (2/ Figure 2-4 ).
Figure 2-4. Stacking adapter and base rack with stacking elements
2. Place bottom of adapter plate (7/ Figure 2-5 ) on the top panel of the lower unit (8/ Figure 2-5 .
3. On both sides, align the bores in the connecting tab (9/ Figure 2-5 ) of the adapter plate
(7/ Figure 2-5 ) with the bores in the rear wall of the lower unit (8/ Figure 2-5 ).
Figure 2-5. Fastening the adapter plate to the lower unit
4. Use the fastening screws supplied to bolt the adapter plate (7/ Figure 2-5 ) to the rear wall of the
lower unit (8/ Figure 2-5 ).
5. Fasten adapter plate (7/ Figure 2-5 ) to the opposite corner of the unit using two screws.
6. Place the device to be stacked with the device stands (6/ Figure 2-5 ) onto the stacking elements
(1/ Figure 2-4 ) at the top of the adapter plate.
3
2
1
6
7
8
9