Thermo Scientific MIE ADR-1500, Инструкция по эксплуатации

Страница: 154 / 154

Serial Commands
B-4 MIE ADR-1500 Instruction Manual Thermo Fisher Scientific
SITE [ site # ]
Returns, or programs, the description of site number sitenum. Sites are
numbered 1–50.
SD [ Status ]
Returns, or programs, the streaming data status.
Status = {“enabled” or “on”, “disabled” or “off”}
TAG [ Tag # ] [ status ]
Returns, or programs, the tag number to be used when next time logging is
to start. And enable or disable logging.
Tag # = {00, 1, 2, …, 99}
Status = {“enabled” or “on”, “disabled” or “off”}
TAGDUMP [ Tag # ]
Returns the complete data logged under the file tag number.
Tag # = {0, 1, 2, …, 99}
TAGS [ Tag # ], [ Tag # ], …
Get a list of the tag files currently in the device.
TEMP [ temp ] [ RH ] [ Pa ]
Get current temperature, RH and atmospheric pressure.
temp is in degrees Celsius
RH is Relative Humidity in percent
Pa is barometric pressure in mmHG
TEMPUNITS [T]
Responds with “TEMPUNITS C”, degrees Celsius are the only allowed.
TIME [ seconds ] [ minutes ] [ hours ]
Returns, or programs, the RTC’s current time.
UNITS [ integer ] the current measurement units:
Units =
0 = μg/m
3
(Mass concentration)
1 = 1/Mm (880 nm scattering coefficient)