Thermo Scientific FOCUS GC, Инструкция по эксплуатации

Страница: 60 / 356

Chapter 2
The FOCUS GC User Interface
Configuration Menu
60 Instruction Manual
Handshake Configuration Menu
The FOCUS GC can be coupled to other instruments, such as an autosampler or a
mass spectrometer. To allow other devices to run properly, you must indicate how
the signal will change. For example, the menu line specifies that another device
will start the GC when the remote start signal changes from high to low.
CONFIG HANDSHAKE
Remote start in H L
Inhibit ready High
End of run out H L
Start of run out H L
GC ready out High
Prep run out High
Table 2-11. Configure Handshake Menu
Parameter Range Description
CONFIG.
HANDSHAKE
This line is the title bar.
Remote Start IN
Pulse High to Low (default)
Pulse Low to High This parameter allows another device to start
the FOCUS GC.
Inhibit Ready
When Low (default)
When High This parameters delays readiness until the GC
receives a signal from another device.
End of Run OUT
Pulse High to Low (default)
Pulse Low to High This parameter signals another device that the
run has ended.
Start of RUN
OUT
Pulse High to Low (default)
Pulse Low to High This parameter signals another device that the
run has started.
GC Ready OUT
When Low (default)
When High This parameter signals another device that the
GC is ready.
Prep-Run OUT
Pulse High to Low (default)
Pulse Low to High This parameter signals another device that the
GC is preparing for a run.