Thermo Scientific Dionex, Руководство оператора

Страница: 26 / 228

Dionex Integral Systems Operator’s Manual
14
Doc. 065250-06 03/2020
Instrumente mit diesem Zeichen sind nicht für den normallen Abfall
bestimmt; Entsorgung soll den lokalen Vorschriften entsprechend
ausgeführt werden.
1.5.5 Safety Practices
General Precautions
•
Periodically check all liquid lines for leaks. Clean up spills
appropriately and use DI (deionized) water to rinse dried reagents off
system components.
•
Make sure that gas and liquid lines cannot become kinked, punctured,
or otherwise damaged.
•
Do not allow liquid waste to accumulate. Follow a regulated,
approved waste disposal program. Never dispose of wastes
containing organic solvents through the municipal sewage system.
Neutralize all acidic and caustic wastes before disposal.
Compressed Gas or Liquid Cylinder Precautions
•
Periodically check all pressure regulators to verify that pressure
settings are within the recommended limits.
•
Compressed gas cylinders are initially pressurized at 14 to 15 MPa
(2200 to 2500 psi). Use a regulator to reduce the delivered air
pressure to 0.3 to 0.5 MPa (50 to 75 psi).
•
Fasten all cylinders securely to an immovable structure.
•
Do not store or move a cylinder unless the safety cap is in place.
•
Store or move cylinders in a vertical position only. Do not move
cylinders with regulators attached.