Thermo Scientific Dionex, Руководство оператора

Страница: 126 / 228

Dionex Integral Systems Operator’s Manual
114
Doc. 065250-06 03/2020
This error occurs if the rotary valve fails to switch position within 1 second of
being toggled.
To troubleshoot:
1. If a sequence is being executed, terminate the sequence by selecting Stop
on the SP ePanel in Chromeleon 7.
2. Turn off the SP power briefly by pressing the SP power switch.
3. Turn on the SP power again.
4. Try to toggle the valve position by clicking the valve control on the
ePanel.
5. If the problem persists, contact Technical Support for Dionex products for
assistance.
This error occurs if the offset value is out of the expected range when the
analog input is being calibrated.
To troubleshoot:
1. Review the calibration procedure and then rerun the calibration (see
Section 10.10 ).
Rotary valve 1 error
-or-
Rotary valve 2 error
-or-
Rotary valve 3 error
User analog input 1 offset calibration value is out of range
-or-
User analog input 2 offset calibration value is out of range
-or-
User analog input 3 offset calibration value is out of range
-or-
User analog input 4 offset calibration value is out of range