Thermo Scientific Dionex, Руководство оператора

Страница: 65 / 228

3 • SP Sample Preparer Description
Doc. 065250-06 03/2020
53
12. Save the configuration.
13. Calibrate the flow sensor (see Section 10.10 ).
3.11 Pressure Sensor (Option)
The optional Pressure Sensor Kit (P/N 068567) provides a pressure transducer
that can measure pressure from 0 to 6.9 MPa (1000 psi). Pressure reading
accuracy is

1% at the calibration point.

The pressure reading is displayed in the
Chromeleon 7 Command window (under the SP device) and on the SP ePanel in
Chromeleon 7.
NOTE Pressure transducers for other pressure ranges are also
available.
To install the pressure transducer:
1. Turn off the SP power.
2. Disconnect the power cord.
3. Thread the pressure transducer’s cable through the upper slot in the mounting
panel (see Figure 3-33 ).
4. Using the screws and washers provided in the Pressure Sensor Kit, attach the
pressure transducer to the mounting plate as shown in Figure 3-33 .