Thermo Scientific Dionex, Руководство оператора

Страница: 114 / 228

Dionex Integral Systems Operator’s Manual
102
Doc. 065250-06 03/2020
Loading pump stopped or lost more than 20 steps Abort page 112
Mixer motor speed is higher than expected Warning page 112
Pressure offset calibration value is out of range Abort page 113
Pressure slope calibration value is out of range Abort page 113
Pump volume command must occur within
BeginSPSamplePrep/EndSPSamplePrep command block Abort page 113
Rotary valve 1 error
Rotary valve 2 error
Rotary valve 3 error Abort page 114
User analog input 1 offset calibration value is out of range
User analog input 2 offset calibration value is out of range
User analog input 3 offset calibration value is out of range
User analog input 4 offset calibration value is out of range Abort page 114
User analog input 1 slope calibration value is out of range
User analog input 2 slope calibration value is out of range
User analog input 3 slope calibration value is out of range
User analog input 4 slope calibration value is out of range Abort page 115
Vessel heater over safe temperature Abort page 115
Vessel heater temperature calibration offset or slope is out of
range Abort page 116
Vessel heater temperature calibration setting is too close Abort page 116
Vial cooler over safe temperature Abort page 116
Vial cooler temperature calibration offset or slope is out of
range Abort page 117
Vial cooler temperature calibration setting is too close Abort page 117
Audit Trail Error Message Default
Severity Level See