6.
Set the Internet Protocol (TCP/IP) Properties for either DHCP or Static IP communication:
Network configuration
Action
DHCP
1.
Select
Obtain an IP address automatically
.
2.
Set the DNS address. If the computer obtains DNS addresses:
• Automatically – Select
Obtain DNS server address automatically
.
• Statically – Select
Use the following DNS address
, then enter the
address of the preferred and alternate DNS servers (if available).
Static IP
1.
Select
Use the following IP address
.
2.
In the
IP Address
field, enter the static IP address.
3.
If necessary, enter a subnet mask.
4.
If necessary, enter a static gateway address in the
Default Gateway
field.
7.
If your network requires advanced TCP/IP setup (such as WINS), define the settings:
a.
Click
Advanced
in the Internet Protocol (TCP/IP) Properties dialog box.
b.
Define the IP Settings, DNS, and WINS tabs as instructed by your systems administrator, then
click
OK
.
8.
Close all dialog boxes by clicking
OK
, then re-start the computer.
The computer is now visible to other computers on the network.
Connect the instrument to a wired network
1.
In the home screen, tap
(Settings)
4
Instrument settings
4
Network configuration
.
The
Network Connections
screen is displayed.
2.
Tap
Edit
.
3.
Tap one of the active fields found under the
Wired
option.
4.
Select a wired network connection:
Wired network connection
Action
DHCP
No further action is required.
Static IP
1.
In the
IP Address
field, enter the static IP address.
2.
If necessary, enter a subnet mask.
3.
If necessary, enter a static gateway address in the
Default
Gateway
field.
Appendix B
Connect the instrument to a network
Connect the instrument to a wired network
B
194
QuantStudio
™
6 Pro Real-Time PCR System and QuantStudio
™
7 Pro Real-Time PCR System User Guide
