Thermo King SLXi Spectrum, Руководство по обслуживанию

Страница: 36 / 342

Maintenance Inspection Schedule 4-6
UNIT MODELS: ALL SLX, SLXe RANGE AND SPECTRUM MODELS HOST UNIT
The service technician is responsible for assessing the condition of
all parts & components found during any service operation to be
in a condition suitable for further operation up to the next
scheduled service. If parts not considered in suitable
condition they should be replaced.
Check/Inspect/Adjust/Change/Replace
INSPECTION
A SERVICE
Every 1000 hours
Or every 12
Months
(whichever comes
first) B SERVICE
Every 3000
hours
Or every 24
Months
(whichever
comes first) SERVICE
C SERVICE
Every 6000 hours
Or every 48
Months
(whichever comes
first)
EDAC Labour standard
1.5 hr 2.5 hrs 7.5 hrs
For SPECTRUM
8.0 hrs
Engine & Unit Mechanical Items
Download ServiceWatch data-logger - Check alarm codes & take
corrective action as required
  
Check HMI & Controller software revision - Upgrades not
included
 
Check fuel supply.
  
Check engine oil level
  
Change engine oil (hot) and oil filter.
 
* Check engine coolant level and protection, maintain protection at
-35'C (or lower if operating in very low ambients.)
If using ELC coolant drain and refill every 12000 hrs or 60 months
(whichever comes first)
  
Inspect compressor, fan drive & water pump belts for condition and
tension. Adjust if necessary.
 
Replace all belts

Inspect all belt tension devises & belt idler pulley for condition &
correct operation
  
Inspect, clean, grease or lubricate the main belt tensioner
  
* Inspect condition of drive coupling bushings and pins when
compressor belt is replaced (Model 30 units)

* Inspect clutch drive bushings and pins, clutch bearings & shoe
wear when compressor drive belt is replaced.(Model 50 units)

Check water pump seal for weep age and bearing serviceability.
  
Perform Automatic Pre-Trip
  
Listen for unusual noises, vibrations, etc.
  
Visually inspect exhaust system for leakage and abnormal smoke
or particulate emissions.
 
Check & adjust engine speeds (high and low speed).
 
Inspect cyclonic air filter element - Dependent on operating
conditions, assess fitness to continue to next service.

Replace air filter
 
Check air cleaner hose for security and damage.
  
****Drain fuel tank condensate water and assess fuel cleanliness
where drain plug is available.
  
Check fuel tank fixings, fuel filler cap security, pipe fittings & air
vent.
  
Check external fuel pre-filter if fitted.

Replace external fuel pre-filter if fitted.
 
Inspect & clean fuel transfer pump inlet strainer - not required if
external fuel pre-filter if fitted.
  
Replace unit fuel filter
 