Textron PT-3500, Руководство оператора

Страница: 27 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 25
ENGINE INFO
When this selection
button is pushed, it
displays a screen
with
multiple
engine monitoring
gauges. This screen
also allows manual control of the engine idle.
IDLE CONTROL BUTTONS
When the [WARM UP IDLE]
button is pushed, it will
toggle the hydraulic power
engine to a high idle. When
the [WORKING RPM] is
pushed it will raise the
hydraulic power engine to a
mid-level working idle. The
[NORMAL IDLE] is used to return to a normal
system managed idle.
TOGGLE LEVELWIND DIRECTION
This function
button, when
pushed and held
for three seconds
changes the direction that the levelwind moves
back and forth: (Left to Right / Right to Left).
This function may need to be changed on initial
start of operations, if the drum is changed, and
when changing the rotational direction of the
drum (payout/pull-in).
NOTE: The system is designed to automatically adjust
the engine idle speed when the hydraulic system is
actuated (i.e. jack movement, drum rotation, etc.).
Once the system is no longer triggered for use, for
instance, the joystick is placed in the neutral position
for a period of time, the engine will automatically
reduce to a low idle speed. Automatic idle speed
reduction times vary dependent upon operating
mode and are in an effort to reduce fuel consumption,
engine emissions, and reduce noise levels.
NOTE: If using the [WARM UP IDLE] or [WORKING
IDLE] functions, they system will remain at higher than
normal idle until the system is actuated or otherwise
lowered in idle by either actuating a drive component
or pressing the [NORMAL IDLE] button.
NOTE: This button will only show when the levelwind
system is turned to [ON].