Textron PT-3500, Руководство оператора

Страница: 31 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 29
Operation
Operator Controls
**For control locations see Operator Control Panel Section on page 20.
System Control Panel
SETUP
This button allows the
operator to change
settings and set data
input factors that are programmed in the system
to regulate how the machine operates.
START BRAKE TEST
This button is used to test the
braking capability of the system
to ensure optimum hydraulic
braking functionality. To test the hydraulic
drum brake holding pressures, press and hold
the START BRAKE Test button for 3 seconds, then
use the joystick to apply pressure to the drum
brakes in both payout and pulling direction. The
operator can watch the drum to see if any
slippage occurs. To exit the test, press the [Esc]
button.
The hydraulic brake test is provided as a feature
for those users whose pre-run procedures
required it, but there is no manufacturer
recommendation on frequency. If the brake test
fails, please contact the S+R Service department.
DIAGNOSTICS
This button provides the operator with several
pages of live views of machine component
inputs and outputs. If the component is
actuated or turned on, the field for that function
will be highlighted green. This screen allows the
operator to troubleshoot machine electronic
unresponsiveness to determine if the input or
output is being received by the system
computer or controller.
ABOUT
This button displays the versions and revisions
for the computer and control systems. This
screen also shows the last four digits of the
equipment VIN- (Vehicle Identification Number).
This screen also allows the operator to disable or
enable the Spider System- (if equipped). This
provides a management level limitation option
for the Spider System. Additional password
protected Rental and Manufacturer Mode
settings pages can be accessed via the [ABOUT]
page after using owner and OEM passwords.
The Rental and Manufacturer functions allow
master-level capacity limitations.