Textron PT-3500, Руководство оператора

Страница: 69 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 67
Operation
Spider System Operations (cont.)
REWINDING
Calibrating/Inputting Levelwind Limit Stops for Rewinding the Spider System
6. After Calibrating/Inputting the desired
Level Wind Stops, set the [LEVEL WIND]
switch, located on the left door, to [ON].

This sets the software to recognize the
Calibrated LEFT and RIGHT LIMITS.
1.
2.
3.
4.
5.
On the Control Panel Main Menu screen, Press [SETUP]

Press [LEVEL WIND]

LEFT SIDE: Press [CALIB LEV WIND LT]

Using the ROCKER SWITCH on top of the
Joystick, visually position the Levelwind Loop to the Left desired limit

Press
and Hold [CALIB LEV WIND LT] until it turns GREEN and reads [LEFT CALIB OK].
RIGHT SIDE: Press
Joystick, visually position the Levelwind Loop to the Left desired limit.

Press and Hold until the icon turns GREEN reads [LEFT (RIGHT) CALIB OK]

NOTE: For PAYOUT, the [LEVELWIND] switch
must be turned [OFF].
NOTE: The Spider System IS NOT
AUTOMATIC. The Operator uses the Joystick to
manually switch directions back and forth from
side to side when the end of the spool is
reached during rewinding.