Textron PT-3500, Руководство оператора

Страница: 35 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 33
Operation
Operator Controls
**For control locations see Operator Control Panel Section on page 20.
System Control Panel
USB Interface
The PT-Series Puller/Tensioners come equipped
with a Universal Serial Bus (USB) 2.0 interface port
for attaching USB storage devices. The PT-Series
control system is designed to record pulling and
tensioning operations information to its internal
memory and allow transfers to a USB device.

To initiate recording, first
ensure that Data Logging is
turned to ON.

Once operations are concluded, the
operator can move the data from the
internal memory to a USB storage device or
/stick , first press the
[SETUP] Button, second
press the [LOGGED
DATA] button, and last
insert the USB drive into
the USB port.

Once on the Data Recording screen, and
with the USB Drive inserted, ensure that the
message.

Next, press the touch screen button marked
[MOVE DATA TO USB]. This will begin the
transfer of the data file.

Once completed remove the USB drive.
NOTE: Once data logging is turned on, the system
will being recording all operation data in one
second increments to the internal memory.
NOTE: As the data is transferred to the USB drive, the
progress bar will gradually fill in green. This process
may take several minutes, and in some cases 30
minutes or more, dependent upon how much data is
being transferred.
NOTE: If the USB device is not inserted, or is not
recognized by the system due to a faulty USB
drive, the system will not show this mount path,
and the upper button message will say insert USB
drive.
NOTE: If copy errors are reported, this may be due to
a faulty USB Drive, or that the USB drive is smaller
than the data being transferred.