Textron PT-3500, Руководство оператора

Страница: 45 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 43
Operation
Quick Start Guide
Reilly PT-3500 / PT-7500
Single Drum Puller/Tensioner 3,500 / 7,500 lb. Capacity
Acronym/Terms Key:
CW Clockwise
CCW Counter Clockwise
DANGER Indicates the information relates to a specific immediate hazard which, if disregarded, will result in severe
personal injury or death.
WARNING Indicates the information relates to a specific immediate hazard or unsafe practice which, if disregarded,
could result in personal injury or death.
CAUTION Indicates the information pertains to a potential hazard or unsafe practice which, if disregarded, may result
in minor personal injury or equipment damage.
NOTE Indicates the information is important to the correct operation or maintenance of the machine.
Start-Up Procedure
Step Action Note
1 Perform all pre-operation inspections.
2 Position machine and chock wheels.
The machine should be positioned in line with
the tower and centered as much as possible on
the line being pulled. Wheels should be
chocked to prevent rolling.
3
Ensure that all controls (levers, switches, etc.) are
in the neutral and disengaged position.
4
With the key inserted, turn master power key
switch CW to the [ON] position .
Wait for the system display to light up and the
system to load.
5
Start the engine : Once the display and panel
lights are on, place the Engine Start button to the
[START/RUN] position.
function- (glow plugs) may be needed. The
glow plugs are automatically engaged once
the Engine Start button is placed in the
[START/RUN] position. After the preheat cycle
has concluded- in about 10 seconds, the
engine will start automatically.
6
Ensure that there are no warnings listed on the
system control display screen.
The engine oil pressure and hydraulic
pressure/flows are both monitored by the
system.
7 Level, stabilize, and anchor the machine .
Use the jack control buttons and bubble
gauges to level the machine.